BW Technologies MicroClip XT Specifikace stáhnout pdf (Strana 23)

GasAlertMicroClip XT

Technical Reference Guide

Startup Message

3. If data is entered in the Startup option (25 characters

maximum) of Fleet Manager II, that data will display dur-

ing the startup self-test. To enter a startup message, refer

to Detector Identification

or the Fleet Manager II Opera-

tor’s Manual.

Alarm Setpoints

4. Next, the TWA, STEL, low, and high alarm setpoints dis-

play.

Note

Alarm setpoints may vary by region. Refer to Factory Gas

Alarm Setpoints.

Sensor and Power Test

5. The detector then tests the sensors.

After testing the sensors, the following screen displays to verify

all sensors have passed.

If an error message displays, refer to Startup Troubleshooting

Note

The sensors are tested continuously while the detector is activated.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 73 74

Žádné komentáře

BW Technologies MicroClip XT Specifikace Strana 23